Kensington I

Five-storey luxury townhouse renovation

Kensington, London

Download case study

Download your own copy of this case study in PDF format.

Download

About this project

Five-storey Townhouse refurbishment in a Prime London Conservation area

  • Client

    Private property investment portfolio

  • Appointed by

    Luxury Residential Contractor

  • Building Type

    Luxury Residential

  • Design

    London-based Architect Studio and Interior Designers with an industry-established Mechanical Consultant

Technology used in this project

Diffusers and Grilles
Linear Diffusers and Joinery Slots
Noise Management
Acoustic Treatment and Duct Attenuation
Controls and Monitors
Home Automation

Design Brief

The challenge presented was to design and install mechanical ventilation systems to a five-storey townhouse as part of a full property refurbishment in a Conservation area. This included a large new-build Basement with Media and Leisure rooms, an Ensuite bedroom, and Utility and Plant space. Full site coordination throughout installation was required. All ventilation units, slot diffusers and ductwork had to fit with a very specific interior design scheme and be managed around physical and architectural constraints.

Solution

The discrete Linear Slot Diffusers were specifically selected for the interior and architectural design schemes on this project. In the Basement Games room a continuous Linear Slot Diffuser created a feature ceiling with a floating raft effect, as the ceiling is separated from the cornice detail.

A Mechanical Ventilation Heat Recovery (MVHR) system provided energy-efficient fresh air into the Basement rooms by pre-heating with the extracted air and individual in-line silent fans served bathrooms on the upper floors. Ventilation regulations ensuring the correct air changes were achieved in all spaces.

Attenuators were sized for adequate airflow and the restricted space within ceiling, and helped prevent detection of equipment noise and air movement by residents and neighbours. System control had full integration into the home automation system to provide careful automatic regulation of air changes throughout the property.

Calibre have worked on the last five projects of mine, and I am looking forward to working with them again on my next project.

Tom Parsons

Tom Parsons

Contracts Manager, Alexander Maltby Ltd

Our Solutions

Residential

Intelligently managed temperature and humidity, ventilation, filtration and purification to improve indoor air quality for residents' comfort, health and wellbeing.

Find out more

Case Studies

Belgravia I

A fully refurbished Penthouse Apartment amalgamated from two neighbouring apartments in the Grade II listed Eaton Square.

Find out more